Shank-type shaper cutters

In this product catalog you will find our selection of shank-type shaper cutters. You can view the available variants in the respective product areas. In addition, special designs can be requested by e-mail at [email protected].

Shank-type shaper cutters

Filter

Module (mm)

0.6

Number of teeth

Taper

MK1 (1)
MK2 (3)
MK4 (3)

length I0 (mm)

200

Results 1-3 of 3

Shank-type shaper cutters DIN 3972/II

Module - 1.00 - 5.00 mm
1.00 - 5.00 mm
Number of teeth - 10 - 24
10 - 24
Pressure angle - 20 °
20 °
Taper - MK2 / MK2 / MK2 / MK2 / MK2 / MK2 / MK2 / MK2 / MK4 / MK2 / MK4 / MK4 / MK4
MK2 / MK2 / MK2 / MK2 / MK2 / MK2 / MK2 / MK2 / MK4 / MK2 / MK4 / MK4 / MK4
length I0 - 100.00 - 150.00 mm
100.00 - 150.00 mm

Shank-type shaper cutters DIN 5480

Shank-type shaper cutters

Module - 0.60 - 5.00 mm
0.60 - 5.00 mm
Number of teeth - 10 - 16
10 - 16
Pressure angle - 30 °
30 °
Taper - MK1 / MK2 / MK2 / MK2 / MK2 / MK2 / MK2 / MK4 / MK2 / MK4 / MK2 / MK4 / MK4 / MK4 / MK2 / MK4 / MK4 / MK4 / MK4 / MK4 / MK4 / MK4 / MK4
MK1 / MK2 / MK2 / MK2 / MK2 / MK2 / MK2 / MK4 / MK2 / MK4 / MK2 / MK4 / MK4 / MK4 / MK2 / MK4 / MK4 / MK4 / MK4 / MK4 / MK4 / MK4 / MK4
length I0 - 70.00 - 200.00 mm
70.00 - 200.00 mm

Shank-type shaper cutters DIN 5482

Module - 1.60 - 2.25 mm
1.60 - 2.25 mm
Number of teeth - 5 - 20
5 - 20
Pressure angle - 30 °
30 °
Taper - MK2 / MK2 / MK4 / MK4 / MK4 / MK4 / MK4 / MK4 / MK4 / MK4
MK2 / MK2 / MK4 / MK4 / MK4 / MK4 / MK4 / MK4 / MK4 / MK4
length I0 - 95.00 - 200.00 mm
95.00 - 200.00 mm

Results per page